Repetidor RF doble banda: Todo OPERADOR CELULAR (CLARO MOVISTAR ENTEL)
20W/43 dBm hasta 10 kilometros
Ampliamente utilizado en el área sin señal celular, área de carga de alto tráfico
admite modo de trabajo múltiple: GSM / EDGE y WCDMA/CDMA/LTE
Estructura del módulo, altamente confiable y fácil de actualizar y mantener. Con una disipación de calor espontánea y segura
| Specificaciones Mecanicas y Fuente de Alimentation | ||
| Power Supply | AC: 100VAC to 240VAC, 50/60Hz | |
| Dimension, Weight | 490*410*210, ≤25 kg | |
| Max. Power Consumption | ≤350W | |
| Temperature Humidity | -25 to +55℃, ≤95% | |
| Environmental Class | IP65 | |
| RF Connector | Donor port:1, service port:1; N-Female, 50ohm | |
| MTBF | ≥100000 hours | |
| Monitor Interface | Local Monitor:RJ-45, Remote Monitor: Modem | |
| Electronic Specifications | ||
| Item | Specification | |
| Downlink | Uplink | |
| Output Power (Max) | 43±2dBm/Band | 27±2dBm/Band |
| Gain (Max.) | 95±3 dB | 90±3 dB |
| NF | ≤5 dB at max gain. | |
| Max. input without damage | -10 dBm | |
| Gain Adjustable Range/Step | ≥30 dB/1dB | |
| Gain Adjustable Error | Gain ajustable range is 0~20 dB, error≤1dB; ≥21 dB, error≤1.5d | |
| ALC | When adding ≤10dB at max. Output level, output variation ≤±2 dB, when adding >10dB, output variation ≤±2 dB or be off | |
| VSWR | ≤1.5 | |
| Time Delay | ≤5μs | |
| Inter-modulation | ≤-40dBc(GSM) | |
| EVM | ≤8%(UMTS) | |
| ≤6%(LTE) | ||
| PCDE | ≤-35 dB(UMTS) | |
| Restraint out of the band | 3MHz≤ f_offset＜5 M ≥40dB | |
| 5 MHz ≤f_offset ≥60dB | ||
| Frequency Error | ≤0.01ppm | |
| Spurious Emission | 9kHz-1GHz: ≤-36dBm, 1GHz-12.75GHz: ≤-30d | |
Repetidor RF doble banda : 850Mhz y 1900Mhz 43dBm (20W)
Ampliamente utilizado en el área sin señal celular, área de carga de alto tráfico
Banda 850MHz: admite modo de trabajo múltiple: GSM / EDGE y WCDMA;
Banda 1900MHz: Soporte CDMA y LTE.
Estructura del módulo, altamente confiable y fácil de actualizar y mantener. Con una disipación de calor espontánea y segura.
850M &1900M Dual Band Selective RF Repeater, 43dBm/Band
The 850M/1900M dual band Selective RF repeater can enhance the coverage area in the wireless network.
It is widely used in the blind area, high traffic load area and the pilot pollution area, etc… Main Features:
- 850MHz band: support multi working mode: GSM/EDGE and WCDMA;1900MHz: support CDMA and LTE.
- Module structure, high reliable and easy to upgrade and
- With a spontaneous heat
- Local and remote monitoring/Control functionality with access to the
| Power Supply and Mechanical Specifications | ||||
| Power Supply | AC: 100V AC to 240V AC, 50/60Hz |
|||
| Dimension, Weight | 490*410*210, ≤25kg | |||
| Consumo eléctrico | ≤350W | |||
| Temperatura trabajo | -25 to +55℃, ≤95% | |||
| Environmental Class | IP65 | |||
| RF Connector | Donor port:1, service port:1; N-Female, 50ohm | |||
| MTBF | ≥100000 hours | |||
| Monitor Interface | Local Monitor:RJ-45, Remote Monitor: Modem | |||
|
Item |
Specification | |||
| Downlink | Uplink | |||
| Frequency Range |
850M | 869 – 894MHz | 824 – 849 MHz | |
| 1900M | 1930 – 1990MHz | 1850 – 1910MHz | ||
|
Bandwidth |
GSM900 | Customize by user | ||
| UMTS2100 | Customize by user | |||
| Potencia (max.) |
43±2dBm/Band |
27±2dBm/Band |
||
| Gain (Max.) | 95±3 dB | 90±3 dB | ||
| NF | ≤5 dB at max. gain | |||
| Max. input without damage | -10 dBm | |||
| Gain Adjustable
Range/Step |
≥30 dB/1dB |
| Gain Adjustable Error | Gain adjustable range is 0~20 dB, error≤1dB; ≥21 dB, error≤1.5 dB |
|
ALC |
When adding ≤10dB at max. Output level, output variation ≤±2 dB,
when adding >10dB, output variation ≤±2 dB or be off. |
|
Ripple in band |
≤4dB(850MHz)
≤6dB(1900MHz) |
| VSWR | ≤1.5 |
| Time Delay | ≤5μs |
| Inter-modulation | ≤-40dBc(GSM) |
|
EVM |
≤8%(UMTS) |
| ≤6%(LTE) | |
| PCDE | ≤-35 dB(UMTS) |
|
Restraint out of the band |
3MHz≤ f_offset＜5 MHz ≥40dB |
| 5 MHz ≤f_offset ≥60dB | |
| Frequency Error | ≤0.01ppm |
| Spurious Emission | 9kHz-1GHz: ≤-36dBm, 1GHz-12.75GHz: ≤-30dBm |
| Schematic Diagram |
 |
| Machine Drawing |
 |